Bathroom Remodel Cost Calculator
Create a transparent bathroom-remodel budget using your own material and labor allowances plus fixed project items.
Bathroom Design & Finish Planner
Explore a coordinated look, choose what you are actually changing and carry measured floor dimensions into the tile and remodeling budget tools below. This is a conceptual finish preview, not a photographed room, a scaled layout or a construction plan.
Warm stone, oak-look cabinetry and a relaxed tonal palette.
Select your finishes, then build the brief to get a project-specific checklist. No prices are generated.
Your design decisions
What to confirm before getting a quote
Important design limitations
Changing the design does not write product prices, set allowances or add line items to your Project Budget. Transfers only move measured floor dimensions or floor area. The floor and shower tile quantities are separate.
Planning example, not a purchase recommendation. The preview never claims that a double vanity, walk-in shower or tub fits the measured room. Layout, door clearance, ventilation, accessibility, waterproofing and local approvals must be checked from real drawings and site conditions.
Bathroom Remodel Visual Budget Breakdown
The design preview above shows your selected tile pattern, floor appearance and vanity finish. This companion reads the same room dimensions and fixture selections and computes a transparent budget band, using the prices you supply below. The prefilled amounts are made-up teaching inputs in US dollars, not US market averages. Replace them with written supplier and contractor quotes.
Photo-Assisted Wall & Floor Finish Preview
Select a photo from your device, outline a visible wall or floor with a few points, then test a finish color while retaining some existing light and shadow. The photo stays inside your browser: no account, upload, tracking endpoint or AI service is used.
This is a manual finish mockup, not a true AI render, a product texture replacement, a scale drawing or evidence that a finish is technically suitable. The tile/plank lines are illustrative only: their scale, perspective and installation pattern are not accurate. Complex shapes, reflections, fixtures and occlusions will not be reconstructed.
Left: your selected finish. Right: the unedited original. The downloaded PNG always contains the complete edited result.
3. For a personal photo, tap or click around one visible surface in order (at least three points). The sample room supports instant presets without this step. Numeric fields also work with a keyboard; each point is a percentage of photo width/height.
0 boundary points
The brief lists your chosen visual finishes, questions to answer and quote items to compare. It does not include your photograph, calculate room dimensions or estimate prices. Attach the PNG separately if you want to share it. Choosing a different photo resets applied finishes but keeps these notes; use “Remove photo, finishes & notes” to clear everything in this editor.
Choose your photo or try the sample to begin. No file is transmitted.
Blue dots are editing guides only and are omitted from the downloaded image. To try a new surface type, color, pattern or strength on the most recent area, change the controls and click "Update last finish style" without tracing again. To change its shape, remove that finish and outline it again. Recoloring a photo does not measure the room.
Turn the visual idea into a real material estimate
Suggested quantity step for your most recent finish: Interior Material Calculators. Measure the real wall or floor and enter the product's packaging and supplier price; the photograph supplies neither dimensions nor a product specification.
Use the Bathroom Visual Budget Breakdown and separate finish planner with your measured dimensions and supplier prices. Do not infer square footage or waterproofing requirements from the photograph.
Trace a full bathroom tile budget
A detailed 40 sq ft illustrative scenario separates floor and shower tile, package rounding, fixture allowances and quoted labor. It is an educational case with transparent, hypothetical amounts, not a claim about local market rates or site suitability.
Plan floor tile and shower-wall tile separately
Measure the room floor independently from the tiled shower walls. Use the actual packaging coverage for each tile product to calculate whole cartons; do not combine cartons from different tile systems or assume they are interchangeable.
Your separate tile takeoffs
Only the net floor area is transferred to the cost estimator's floor-area basis. Shower-wall tile, waterproofing, fixtures and licensed work require separate actual supplier or contractor allowances; do not pretend their cost scales with bathroom floor area.
Continue your project estimate
Estimate tile quantity →Use allowances instead of pretending every bathroom costs the same
Bathroom remodel budgets vary sharply with fixtures, tile, plumbing scope, demolition and labor. Treat the calculator as a transparent allowance model and replace each rate with a project-specific quote where possible.
Use related tile, paint or flooring calculators when you need a measured material quantity before assigning cost.
- Separate finish allowances from labor.
- Keep contingency visible rather than hidden.
- Update the estimate as selections become known.
From finish inspiration to an actionable bathroom plan
Use the design planner to compare a warm spa look, a modern high-contrast bathroom or a softer green-and-wood palette. Changing the proposed vanity or shower changes your planning checklist, not a hidden estimate. A decorative drawing cannot confirm that your chosen fixtures fit, and a style label cannot determine a local contractor price.
Once the concept is clear, transfer the actual room dimensions into the tile takeoff. Floor tile and wet-area wall tile are different materials, so they must have their own coverage and extra allowance. Next, use the cost form with your supplier and installer prices. The design tool will never fill in fabricated rates or automatically add unquoted work to your budget.
A cosmetic refresh often preserves plumbing locations and existing surfaces, while replacing fixtures or rebuilding a shower can introduce removal, waterproofing, ventilation and licensed-trade considerations. This is a scope comparison, not a promise that a project is cheap, permitted or physically possible. Verify site conditions and professional requirements before ordering.
Choose bathroom finishes for the room you actually have
The three visual styles in the planner are starting palettes, not products or construction specifications. Before choosing a tile or vanity, bring actual samples into the room and inspect them under daytime and evening lighting. A preview on a phone cannot reproduce the scale, texture, gloss or color of installed materials.
| Design choice | Visual effect | What changes in the real project |
|---|---|---|
| Offset rectangular wall tile | Repeated grout joints and a more detailed wall pattern | Ask for the actual tile dimensions, pattern offset, grout width, substrate suitability and installer cutting allowance |
| Large-format wall tile | Fewer visible joints on many layouts | Check wall flatness, handling, edge cuts and any additional substrate preparation; fewer joints do not make an installation automatically waterproof |
| Vertical stacked wall tile | Strong vertical lines and a different sense of proportion | Confirm tile orientation is approved, joint alignment around niches and corners, and where cut pieces land |
| Stone-look or wood-look porcelain floor | Natural-material appearance without assuming natural stone or real wood | Verify the exact product's wet-floor slip performance, cleaning instructions, shade variation, grout and substrate requirements |
| Single versus double vanity | Different storage and counter arrangements | Measure actual cabinet width, door and drawer swings, circulation and plumbing; floor area alone cannot prove a double vanity fits |
| Keeping a tub versus considering a walk-in shower | A different wet-area look and daily use | Check drainage, required slopes, entry clearance, waterproofing, accessibility, demolition and plumbing with qualified trades |
For the same 8 × 7 ft (56 sq ft) room used in the tile example below, switching from an offset wall pattern to a large-format wall tile does not change the measured floor area. It can, however, change the tile SKU, carton coverage, cutting layout, labor quotation and suitability for the shower walls. Therefore, keep the design choice separate from the exact product measurements and quoted unit prices.
Compare remodel scopes before comparing contractor prices
A refresh, a finishes replacement and a full remodel can share the same mood board but have different work and risks. Record what stays and what changes before deciding which quote is less expensive.
| Scope | Typical planning question | Quotes and checks to request |
|---|---|---|
| Cosmetic refresh | Can sound existing surfaces and fixture locations remain? | Written paint and finish preparation, fittings, ventilation checks and any separately quoted repairs |
| Surfaces and fixtures | Which floor or shower finishes, vanity and fittings are actually being replaced? | Separate tile cartons, removal, substrate preparation, waterproofing scope, fixture supply and installation |
| Full remodel | Are layout or plumbing/electrical locations changing? | Site survey, qualified trade scopes, demolition, ventilation, approvals, schedule, access and explicit contingencies |
Buying sequence: agree on a scope → measure each surface → choose manufacturer-verified products → obtain comparable written quotes → enter actual material/labor rates into the calculator → carry one selected project estimate into Project Budget. Never add both competing contractor bids or duplicate tile material within a bundled rate and a fixed extra.
How this estimate works
Enter floor area and any per-square-foot material or labor allowances you want to compare. Use fixed extras for fixtures, plumbing, electrical, permits, cabinetry or other quoted items.
total = adjusted material quantity × material rate + project quantity × labor rate + fixed extras
Example
A 60 sq ft bathroom with $80/sq ft in material allowance and $100/sq ft in labor starts at $4,800 material and $6,000 labor before fixed items. Example rates are illustrative only; replace them with supplier or contractor pricing for your project.
Build the bathroom budget from separate scope items
A floor-area allowance is only a planning shortcut. Use the measurement tool above to take off floor tile and shower-wall tile independently. For a complete budget, keep fixture packages, tile, plumbing, electrical, demolition, cabinetry, waterproofing and permits visible as separate quote or allowance items. Do not also charge the same floor materials in both the square-foot rate and fixed extras.
Use the Tile Calculator for measured tile quantity and the Paint Calculator for finish-paint quantity before assigning local prices. Add the completed bathroom estimate to the Project Budget Workspace when it is part of a larger project.
This calculator does not decide code, waterproofing, ventilation, structural or licensed-trade requirements. Those depend on the actual project and local rules.
Worked example: bathroom floor and shower are different tile purchases
Suppose your bathroom floor measures 8 × 7 ft. The measured floor is 56 sq ft. With a chosen 10% extra for cuts, you need to cover 61.6 sq ft. If the floor tile you select actually covers 12 sq ft per carton, round 61.6 ÷ 12 upward to 6 floor tile cartons.
Now consider a tiled shower-wall section with a combined 5 ft horizontal wall run and 7 ft tiled height, minus 3 sq ft of untiled openings. The wall tile area is 5 × 7 − 3 = 32 sq ft. With its own 15% cutting allowance, plan for 36.8 sq ft of shower wall tile. If that different wall tile product covers 10 sq ft per carton, you need 4 wall tile cartons.
These are illustrative measurement, cutting and packaging assumptions — not recommended waste rates, product coverage values or local prices. Keep the 6 floor cartons and 4 wall cartons separate; cartons from distinct tile products are not interchangeable. The room's 56 sq ft is still the floor-area basis for the general budget form. Shower-wall labor, waterproofing and fixtures need their own project quotes.
How to avoid an incomplete bathroom quote
Ask every contractor for the scope in writing. Separate waterproofing and substrate preparation from decorative tile materials, confirm who supplies the vanity, toilet, shower components and ventilation, and identify removal, disposal, permit, electrical and plumbing work. Compare quote exclusions explicitly rather than assuming a low square-foot price covers the same work.
The measurement tool estimates a material quantity, not a compliant waterproofing assembly or a finished remodeling price. Professional waterproofing, drainage, electrical and plumbing decisions depend on the actual project and local rules. Use the side-by-side contractor quote comparison before choosing an installer.
Bathroom remodel scope checklist
Two bathrooms with the same floor area can have very different budgets. Before comparing scenarios, write down which of these scope groups are actually changing:
- Surfaces: floor tile, shower or tub surround, paint, trim and wall repair.
- Fixtures: vanity, countertop, sink, faucet, toilet, tub, shower hardware, mirror and accessories.
- Trade work: plumbing, electrical, ventilation, waterproofing and any required licensed work.
- Project extras: demolition, disposal, delivery, permits, floor or wall preparation and contingency.
Use the square-foot fields only for costs that genuinely scale with area. Put quoted fixture packages and one-time scope items into fixed extras, or keep them as separate line items in the Project Budget Workspace when you need a more auditable breakdown.
Related tools
Measure materials for the bathroom project · All Cost Calculators · Calculation Methodology
Related tools for this project
Send this calculator to a homeowner, contractor or DIY partner
Share the canonical ProjectCalcWorks link without an account or signup requirement.